7 Kinds Of Non-negligible Expansion Machinery Equipment Troubleshooting Methods

Bulking machinery is a kind of common food processing equipment, which is widely used in the fields of corn bulking and rice cake bulking. However, various faults are often encountered during use, which seriously affect the normal operation of the equipment. Therefore, it is of great significance to master the troubleshooting method of extruding machinery and equipment to ensure production efficiency and product quality. This article will introduce 7 kinds of non-negligible troubleshooting methods for expanding machinery equipment.
First, check the power supply system
Power supply system is the basis of normal operation of extruded machinery equipment, and the cause of failure often lies in the power supply system. First of all, check whether the power supply voltage is stable, too low or too high voltage will affect the normal operation of the equipment, and even damage the equipment in serious cases. Second, check whether the power line is in poor contact or short circuit, which may cause the device to fail to start normally. Check whether the grounding of the equipment is firm to ensure the safe operation of the electrical equipment.
Second, check the transmission system
The transmission system is the key to the expansion of mechanical equipment to achieve various actions. The cause of the failure is often in the transmission system, mainly gear bearing damage, transmission belt wear and other problems. Therefore, regular inspection and maintenance of the transmission system is very necessary. First, check whether the transmission belt of the equipment is worn, loose or broken, and it needs to be replaced if necessary. In addition, pay attention to check whether the bearing of the equipment has impurities or wear, and if necessary, it needs to be cleaned or replaced.
Third, check the motor system
Motor is the main power source of extruded machinery and equipment, and the cause of failure is often in the motor system. First of all, check whether the motor is working normally, whether there is abnormal noise, heat and other abnormal conditions. Secondly, check whether the insulation state of the motor is good to ensure the safe operation of the motor. Check whether the wiring of the motor is good, and loose or short-circuited wiring will affect the normal operation of the motor.
Fourth, clean and maintain the heating system
Heating system is the key part of bulking machinery and equipment, and the reason of failure often lies in the heating system. First of all, regular cleaning and maintenance of the heating element to ensure that its surface is clean, to avoid ash accumulation and overheating caused by the burning of the element. Secondly, check the temperature control device of the heating system to ensure that it works properly to avoid overheating or too low temperature affecting the quality of the product.
Five, check the cooling system
Cooling system is an important guarantee for the normal operation of expanding machinery equipment, and the reason for failure is often in the cooling system. First, check whether the cooling fan works properly to ensure that the device can dissipate heat normally. Secondly, check whether the cooling water pipeline is smooth, and check whether the cooling water pressure is normal. Regularly clean the cooling system to avoid impurities blocking the cooling pipeline and affecting the heat dissipation effect.
6. Check the control system
The control system is the center of bulking mechanical equipment to realize various actions, and the cause of failure often lies in the control system. First of all, check whether the control system is working normally and whether there are problems such as open circuit or short circuit. Second, check whether the buttons on the control panel are sensitive and whether the display is working properly. Check whether the program of the control system is correct, and reset or update the program if necessary.
Vii. Regular maintenance and repair
Regular maintenance and repair is an important link to ensure the normal operation of expanding machinery and equipment. First of all, regularly clean the various components of the equipment, including the heating system, cooling system, transmission system, etc. Secondly, check the wear of the various parts of the equipment, and lubricate and replace them if necessary. In addition, pay attention to whether the safety protection device of the equipment is in good condition, and it needs to be repaired or replaced if necessary.
To sum up, mastering the troubleshooting method of expanding mechanical equipment is the key to ensure the normal operation of the equipment, and the above 7 methods can not be ignored. Only regular inspection and maintenance of equipment, timely troubleshooting, in order to ensure the stable improvement of production efficiency and product quality.